Note: The links above are needed to help keep this site running, please consider using them.
Search the Community
Showing results for tags 'arcelik'.
Found 1 result
Hi Andy . I think you said on occasion before that you never really got into repairing Tumble Dryers (didn't you?) and i know this is just a washing machine forum but I just wanted to get your angle on this. I have tested our new Beko Tumble dryer with a multimeter and the cabinet is earthed , which is good but I checked the drum itself (which is metal) and that isnt earthed. - well this would explain why the odd few times i have been getting a static electrical shock when removing dried items from the drum , especially if in with the drying there are synthetic items. apart from the aspect of getting static shocks, how safe are these tumble dryers that there is a large circumference of metal that can be touched by bare hands without it being earthed? I mean it might be a be in a million change but say if a live wire in the cabinet gets to touch the revolving drum , its not going to blow a fuse or trip a switch , but if you open the door and touch the 'live' drum its gonna give you a jolt for sure. Have had the back off that covers the heater element and back of drum and the drum shaft fits into a plastic bearing , so thats where the ground stops to get to the metal drum. Now other makes like Creda/hotpoint and even white knight have all included a 'earthing strip' at the back of the drum that touches on the metal drum spindle so that it earths the drum ... Beko (manufactured by Arcelik in turkey) haven't . They have the screw holes to screw the earth strip to but they havent put one on! Whats your view on it andy, being an appliance engineer or even from a personal point of view. Do you think its safe not to have the drum earthed?