interlock modification to the block connector.

[gee]

hello please welcome me with open arms to this community. 

I have a problem with replacing the new type of door interlock onto the old type door interlock block harness as they is obvious mismatch.however been told to adjust the interlock block connector.even with diagram provided it still does not add up. there are five wires in the harness vs 3 wires in the diagram that was provided. 

Edited March 17, 2017 by gee
Attempting to upload pics

[Whitegoodshelp (Andy)]

It doesn't sound like a proper replacement if it looks very different and 2 wires are not used. You have to make sure you have the right replacement part. If you do then the leaflet should explain exactly what to do. Can you find the part you need on Ransom Spares using your model number and see if it's the same as the one you've bought?