Fabric Conditioner Full Of Water After Washing

[himi]

Hi,

In my Miele Novotronic w839 the rinse water is left filled up after every washing program has completed so I can not fill it with new rinse.

ie. If I run a wash program is it not supposed to leave the rinse compartment empty so one can fill it again for the next washing cycle?

This was not an issue before, it has always worked.

I have washed and cleaned the drawer to make sure the channels are clean from any dirt or so.

I have also made sure the holes above the drawer are not dirty preventing the water from filling the drawer.

Ideas?

Cheers!

[Whitegoodshelp (Andy)]

The only explanation I can think of is that the tube where the fabric conditioner and the last but of water siphons out of the fabric conditioner compartment must be either missing, or clogged up. The fabric conditioner / rinse aid compartment is always full of water