RAV Posted February 26, 2012 Report Share Posted February 26, 2012 hi I hope someone can help. I have a Hotpoint Washer Dryer combi WDL540G in graphite. the water was not heating so i replaced the element. and i still have no joy. I did a continuity test on the old element and it seems fine I have no error codes or anythign to indicate what is wrong. i would be greatful if someone is able to advise. i am an electrician, so i can perform technical checks if needed. kind regards Rav Link to comment Share on other sites More sharing options...
Root Admin Whitegoodshelp (Andy) Posted February 27, 2012 Root Admin Report Share Posted February 27, 2012 The heater should be tested with a meter before thinking of replacing it and only be replaced if it's open circuit or down to earth but I suppose you know that now There's a few people having problems with the washing machine apparently not heating but not producing an error code. All the current advice I have on the subject (including a link to someone who found a conclusion are here washing machine not heating water If you find out what the problem is please let us know. Need a repair or spare parts? Book a Repair | Buy appliance spares (Cheapest prices guaranteed) Warning: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now