JJM26 Posted December 8, 2011 Report Share Posted December 8, 2011 Hi, Looking for some help please. I have a HAUS mw-1050, but the machine wont kick into a full spin cycle. I can get it to go on a pin only cycle when the machine is empty, but not when there is anything in it. I tried this to establish if it was the motor or not, and I think this has ruled that out. Any advice would be greatly appreciated. Thanks James Link to comment Share on other sites More sharing options...
Root Admin Whitegoodshelp (Andy) Posted December 14, 2011 Root Admin Report Share Posted December 14, 2011 Have you tried it with various loads (especially a nice full load) in case it's not able to balance some smaller loads? Other than that if it's not a slack belt (rare these days) it could be the motor but I'd get it checked by an engineer.( Washing machine wont spin just one item or very small loads ) Need a repair or spare parts? Book a Repair | Buy appliance spares (Cheapest prices guaranteed) Warning: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now