chardonnay Posted December 6, 2011 Report Share Posted December 6, 2011 Can anyone help? I put a load of washing on and when I went to unload the machine at what i expected to be the end of its cycle I found the machine had stopped before completion. I pushed the start button again and since then the machine is constantly filling with water even on the spin programme. I have tried the cancel button to reset the machine to rule out any programming error to no avail. What could the problem be? Link to comment Share on other sites More sharing options...
Root Admin Whitegoodshelp (Andy) Posted December 14, 2011 Root Admin Report Share Posted December 14, 2011 It could be quite a few things really. You need an engineer I'm afraid for something like that. It could be anything from an earth leakage on a component, to it thinking it's overheating (faulty NTC) or the main pcb and so on.. Need a repair or spare parts? Book a Repair | Buy appliance spares (Cheapest prices guaranteed) Warning: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith. Link to comment Share on other sites More sharing options...
chardonnay Posted December 14, 2011 Author Report Share Posted December 14, 2011 Thanks for getting back to me Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now