Danyel Posted July 7, 2022 Posted July 7, 2022 Hi everyone, been hearing some metal clanging in the washing machine when it runs and when i had a look there’s a wire sticking out of one of the holes in the drum. Pulled it out a bit more before realising its probably coming from inside the machine as opposed to one of us leaving something in the wash that shouldn’t be there. Picture attaches. Any suggestions on what it could be? Thanks!
Root Admin Whitegoodshelp Posted July 7, 2022 Root Admin Posted July 7, 2022 Hi. That looks like an underwire from a bra. Pull it out. Danyel and andyr12345 2 Need a repair or spare parts? Book a Repair | Spares4Appliances WARNING: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.
Danyel Posted July 8, 2022 Author Posted July 8, 2022 Think it was. Pulled out and machine working fine now. Thanks! andyr12345 and Whitegoodshelp 1 1
Root Admin Whitegoodshelp Posted July 8, 2022 Root Admin Posted July 8, 2022 That was a lucky escape. If it had gone fully under the drum it may have needed stripping down or it may have jammed the pump. andyr12345 1 Need a repair or spare parts? Book a Repair | Spares4Appliances WARNING: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now