Dave1234 Posted July 30, 2020 Report Share Posted July 30, 2020 Miele WT 2780 washer/dryer leaving black residue on sheets. Have thoroughly cleaned following guidance in user manual but still persists. Residue seems to be in aperture at top front of drum which is difficult to access. We no longer use the dryer and wonder whether this is hot air access point that has become clogged due to not using. If so - how best to clean. Any ideas? Link to comment Share on other sites More sharing options...
Root Admin Whitegoodshelp (Andy) Posted July 30, 2020 Root Admin Report Share Posted July 30, 2020 Yes it could be gunk from inside the heating chamber. Does the Miele washer dryer have a cleaning cycle? Young could try cleaning it out with a small dishwasher brush or something that could route about inside it. Also could try running the washer dryer cycle a few times but if bad it may need the heating chamber top taking off. Need a repair or spare parts? Book a Repair | Buy appliance spares (Cheapest prices guaranteed) Warning: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now