Blomberg WN-8428, 8Kg front load, F 08 ??

[Dedy]

Hi guys, sure hope you can help me on this one! With the virus situation we're stuck at home and my wife is loosing it ...

Well, after completing a cycle and reloaded, my noticed that the machine is not responding.

• Display is showing blinking "Play"sign (pause/play) and most of the other info is not showing
• Program selector is not responsive either (nothing changes)
• Unplugging for 20 Min did nothing
• Found out on the net a procedure to turn it on while the program selector is at "12"and while holding the "Play/Pause"button and it turned on showing F 08. Also when pressing the "play/pause" at this stage shows C88 (Can be seen in attached video)
• BTW I once knew a key combination to hold for a few seconds to reset the controller but I forgot it... does anyone know it?

I'm attaching videos of the display in normal Ön" and with the F-08 as I described above.

Any help on this would be very much appreciated!!! 

Thanks and wish us all good health!

Dedy

 

 

Edited April 10, 2020 by Dedy
misspell

[Whitegoodshelp]

Unfortunately I don't have any error codes for Blomberg. What's that high pitched noise, is that the washing machine and normal?

[Dedy]

Hi Andy, 

Thank you for your reply. 

I have managed to solve this! 

Just went over the most suspicious things, it was the door switch /locker

By the way, to reset the code after the replacement, you need to hold the two buttons below the display, marked with a lock symbol... 

Best,

Dedy.