motonit77 Posted December 12, 2012 Report Share Posted December 12, 2012 Hi, I have washer and dryer Indesit IWDC 6125S. Today I did one washing which went well then put another one on and after about 5min washer make some little noises and stop working and all lights start flashing. I did unplug few times, clean the filter and plug again and now there is no more flashing but when I set the program doesnt run, when I press Intensive wash or eco time button on that one light is flashing twice and stop. I did try put drain cycle but doen't run. I just checked now and all lights are flashing again. Any sugestions? Regards Sylwester Link to comment Share on other sites More sharing options...
Root Admin Whitegoodshelp (Andy) Posted December 13, 2012 Root Admin Report Share Posted December 13, 2012 Indesit and Hotpoint, which are made by the same company sometimes stop with all the lights flashing without displaying a proper error code as they should do. I would get an engineer to look at it as it could be different things some of which are impossible to check for a diy repair. Need a repair or spare parts? Book a Repair | Buy appliance spares (Cheapest prices guaranteed) Warning: Read this before attempting any diy repairs. No representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now