Hotpoint Aquarius Wd420 Wont Fill - Leds Flash

[rumcat]

Hi

Can anyone help. My hotpoint Aquarius starts, the door is locked but the 'door locked' light does not come on, water goes into the detergent drawer but then the crease hold button and on off button flashes and no water goes into drum and it doesn't turn. It makes a noise for about 5 mins as if water is going in but it doesn't. It then stops making a noise and the buttons still flash.

Any help will be appreciated

thanks

Sian x

[edhorwood]

sounds like the main pcb gone.

[Whitegoodshelp (Andy)]

The lights flashing are giving a specific error code which will indicate the possible causes of the fault. Error codes are indicated by flashing lights but the fault codes are not listed by name, only light 1, light 2 or LED 1, LED 2 etc. You need to report which number the lights are. Count from left to right or top down depending on how they are displayed. Full details here -

http://www.whitegoodshelp.co.uk/washing-machine-lights-flashing/