Search the Community

Hi everyone, I am trying to source the part in the picture attached for a Miele WT2670. I have been in contact with Miele for the last week back and forth, and they cannot name the part or supply it, i know the washing machine is old. But I am desperate to find it, as I have 10 days of family washing built up now. Please can anyone help me find this part? HEEEELLLLPPPP thanks so much. ps in the pictures it isnt the red piece....thanks.

Hi all, hope you can help. I've moved in with the Mrs and discovered that the washing machine is plugged into the hot tap. I've never heard of a machine where it's not supposed to be plugged into the cold, so I figured I'd check online to make sure, but I can't find any reviews or a user manual on the internet and the Swan helpline isn't open on weekends so I'm a little stuck. Could anyone confirm if it's got its own heating unit and I should switch it to the cold tap? Thanks in advance!

So the cycles on my Bosch WM ( WDO2866GB/07 ) are taking much longer than they should...the rinse programme seems fine. Im trying to work out if its the element / thermostat or the programme board...which is what several repair people have suggested Its 10yrs old but don't want to replace unless I have to...I gather a new board means it not worth repairing but if it's the thermostat it is. On the hottest wash the glass did not seem that hot but not sure if that proves anything or not. No error codes showing. I am in a hard water area. Any thoughts or suggestions would be gratefully received...please

Hello. I was wondering if somebody can help. We have a Miele t7944c honeycombe care tumble dryer. All of the settings bar 2 , works for 1 minute and the the display goes to "0" as if the cycle is finished. But is hasn't it's only been on for 1 minute. There are 2 cycles that work and that is the 4 minute cycle for "wool delicates" and that seems to work fine and heat up. The 15 minute cycle sometimes goes for the full 15 minutes but usually doesn't. I have checked all the filters and cleaned them of any fluff removed the rear panel and cleaned there. i have been reading up and maybe it's a sensor? But don't want to be replacing parts if I don't need to. Thanks in advance for any advise.