Note: The links above are needed to help keep this site running, please consider using them.
Search the Community
Showing results for tags 'WMI71641'.
Found 1 result
Hi Andy, I have the following issue with a Beko WMI71641. I will give a detailed description of the fault and hopefully you could point me to the fault. I am at a loss. The machine is 2 years old and was working fine until a few weeks ago. The machine trips the electrics at 3 points in any washing programme. I will give the description of the quick wash programme as that is the one we use most ofthe time. The machine has a time to run of 39 minutes in total and works wonderfully for about 19 minutes, then with 20 minutes to go, the machine starts to drain and the electrics trip. After resetting the electrics a few times the machine continues until 16 minutes remain and it drains again, yep the electrics trip. after resetting a few times the machine runs again for a further 6 minutes and then drains again, and you guessed it, the electrics trip. after resetting again the machine completes it cycle with no further issues. My first thought was the pump, however, the machine drains at 28 mins and has no issues at this point. But toi be sure I replaced the pump and after inspecting the PCB i replaced that as well because there was a small IC burnt along with several diodes on the board. Having made these changes the machine still trips the electrics at the 3 points mentioned earlier. I have replaced the RCD in the main board too thinking this might be causing the issue. Any ideas?? Thanks in advance.