Hoover Hnf 6147 Pcb Board

[tenheads]

Hi great forum, was wondering were i could source a main pcb board for a hoover hnf 6147 washer, not sure wether to try and repair the board or replace it any help opinions would be gratefully recieved.

[Whitegoodshelp]

Few places sell main pcb boards for washing machines because they are the most misdiagnosed part ordered by the public. Basically they have more trouble than it's worth selling them as so many people fit them and find it hasn't cured the fault. Then they have hassle when the customer tries to get their money back - which they can't. These parts are commonly also very expensive.

The "hnf6147 prog module" is listed on 4washerhelp (and on the main Hoover spares site) at £103.99 so it would be quite a gamble to speculatively spend that much money if you aren't sure it will fix the fault. If your Hoover washing machine is under 5 years old I would get Hoover out under their 5 year parts warranty. You will be charged labour but the part should be free and it should cost less than ordering the part. If it's over 5 years old I would either scrap it or get an engineer out to diagnose it or post full details of the fault to see if I can advise any further.