Hoover washing machine only fills with water on rapid 14/30/44 setting

[Graz]

My hoover washing machine came up with (E02), so googled and it said either filter was blocked or the water inlet valve was faulty, checked filter which was ok so replaced inlet valve but will still only will fill with water on a rapid wash or rinse setting. Tried resetting the machine, checked soap tray still nothing, it's a Hoover  H-wash 300 lite 10kg 1400 spin                                  model no H3W410TE/1-80. Don't really want to pay for an engineer to come out as its only just over a year old if its a simple fix , any ideas or advice would be really appreciated thanks. Graz

[Whitegoodshelp]

Could be one of the fill valves isn’t working. Maybe the one that flushed the detergent into the drum?

[Graz]

Thank you Andy I will check that .

 

[Whitegoodshelp]

Normally, a washing machine will take in water from one valve for several seconds to run water into the sump hose,  followed by a second valve to finish the fill and flush the detergent in.