Hoover dynamic next DXCC69W3 displaying rotating dashes

[mike west]

Machine not draining, no blockage, drain pump impeller just sitting oscillating slighlty. E03 error

Could turn drain impeller by hand but felt stiff.

Took off pump to check, looked ok, nothing at rear of impeller, felt tight/loose when rotating.

After refit & power back on the display is not normal, just like dashes going round, see attached vid.

[mike west]

An update.

Left machine powered up & display had returned back to normal after a few hours?

[Whitegoodshelp]

Hi Mike. The true test will be if it works OK now? BTW the pump impellers are normally a little stiff. They sort of turn then suddenly free off and then go stiff again. I think it's turning through a magnet. 

[mike west]

Hi Andy,

Well the drain pump worked for a few days then died.

New one fitted & we're all good.

Cheers

Mike