Maytag Top Loader Tub Seal Won't Seat

[acestu]

Hi,

After replacing the tub seal and stem seal in our Maytag LAT7304EGE water still leaks from the bottom of the tub, the new seal dosen't appear to be seating properly, I have watched several videos and there are different opinions on just wiping or putting grease on the seal, also some say to run a dry spin cycle for at least 3 mins, if anyone has any tips to make it seal I would be most grateful as we are a registered childrens charity running a 60 acre retreat centre and we are lost without the washer.

Thanks In Advance

Stuart