Suspension Plastic Pins

[adamski]

Hi.

Hope someone can help me.

After fitting new bearings on my hotpoint WMA10 the drum stabiliser pins keep working their way out.

I have pushed them back in countless times but after a few washes the come out again.

What can I do to stop this from happening.

Regards adamski.

[Whitegoodshelp]

They are usually only plastic so I'd try replacing them. They should either have little plastic lugs on them which act like arrow heads so when they are pushed home the plastic lug pops out and stops the pin coming out, or they should just be a nice tight fit.

 

You can buy new damper pegs for your model here  

 

http://www.4washerhelp.co.uk/damper-peg/product.pl?pid=640108&query=hotpoint+WMA10

[adamski]

Thanks for you advice i'll try new ones.