Jump to content
Appliance Offers
Gary C

Hotpoint Washer Tripping - Door Switch?

Recommended Posts

Hi All,

I have an issue with our Hotpoint Aquarius WM62P tripping out the RCD.

It happens within a couple of seconds of selecting any function/wash cycle/spin.

I think it's safe to say not the motor as it won't even fill with water, I assume there's no heater as it's hot and cold fed. Everything seems nice and dry and nothing visible like worn insulation causing a short.

This only seems to leave the door lock switch or the main control unit.

If I have power on, a wash cycle selected but the door open it seems fine. As soon as I shut the door - trip.

Does this suggest it's the door switch? Or is it only when the door is shut that the main control unit receives power - meaning it could still be this main unit?

Help appreciated! If it is the door switch it is obviously easy to replace and I assume quite cheap.

Thanks,

Gary C

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

I have advice on washing machine fusing or tripping electrics which includes a list of the most common causes but as I mention in the article I don't think it's a fault to tackle without a proper insulation test meter.

Every washing machine has a heater, and some have a system where power runs to most components straight away and they are switch on using the neutral side so it's possible a low insulation on a heater can trip the electrics even when it isn't in use.

Door interlocks aren't particularly expensive or difficult to replace but without door interlock powered up there's no power running through the rest of the machine so it's possible it's just sending power elsewhere and shorting out there. Therefore you can't assume it's the door interlock - although they can cause this problem. Without an insulation test meter you can only guess-swap parts, which is often a blind alley for DIYers.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...