Jump to content
Appliance Offers
Neil H

Slamming Meile Washing Machine Door

Recommended Posts

I recently bought a new Meile washing machine (W2859IWPMRS S). It is a great machine, however I have to slam the door quite hard to close this. My last Meile machine did not require this, is this typical, or would you think I have a problem with the door catch/lock?

Thanks

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

I recently bought a new Meile washing machine (W2859IWPMRS S). It is a great machine, however I have to slam the door quite hard to close this. My last Meile machine did not require this, is this typical, or would you think I have a problem with the door catch/lock?

Thanks

Hi Neil,

Could be a couple of small issues here. The integrated door panel may be too heavy (least likely)or poorly fitted and is not aligning too well, also the hinge barrels on Miele's are deeper than most and they may not be fitting the door hinge cut outs too well, which will make it very difficult to close. Check these visually and consult the dealers/installers first if any doubts.

The integrated doors are usually a bit more difficult to close. Try closing the door by pushing the door firmly where the catch is, so all your effort is used in making the latch and lock meet. If you are just pushing the door for example at the top it will be difficult to get it to close easily.

Regards

Share this post


Link to post
Share on other sites

I remember being surprised with my Miele washing machine when the instruction book said that to close the door you should swing it shut, sort of slamming it shut. It should ease off after a while but they are quite stiff to close at first.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

I recently bought a new Meile washing machine (W2859IWPMRS S). It is a great machine, however I have to slam the door quite hard to close this. My last Meile machine did not require this, is this typical, or would you think I have a problem with the door catch/lock?

Thanks

Hello, I have recently bought a Miele W2839i integrated washing machine and i have to do exactly the same to get the door to shut! I have tried pushing it shut but that does not work so the only way to get it closed is to give it a good slam.

Richard

Share this post


Link to post
Share on other sites

You are not alone, my wife cannot close the door of our brand new Miele Washing Machine W2819i. The door will close if you use brute force , but I am talking significant force the sort that could move the earth on its axis - not what you would expect when it comes to something as expensive as a Miele.

We have telephoned Miele three times and their view continues to be that the doors just need a good slam and that is that! Begrudgingly they are now sending out a technician but the reputation surrounding Miele has already become tarnished in our eyes whatever the outcome. Certainly the help desk "attitude" could be more helpful and the culture that comes across is one that sees the customer as the problem.

Anyway the technician comes out on 9th November (Comments like 'they first check it is plugged in safely' and that 'if we are not in when they call we have to pay a £60 charge' etc etc to be honest just alienate me) - we might be proved wrong and it will be interesting to find out what the problem is - even if it turns out that we are just physically too weak to use their Miele machines!

Stephen

Share this post


Link to post
Share on other sites

This video shows a Miele washing machine being subjected to a repeated door slam test. It shows how you can slam a Miele door to close it. If you can't get yours to slam shut as in this video there may be a problem that needs fixing.

http://www.washerhelp.co.uk/Miele-videos/Miele-door-impact-test.mpg


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Neil H & Stephen Ball

People like you on the internet make me laugh (more out of frustration than humour) where you post, whinge and grimace on forums but then don't follow up with any conclusion.... thanks a bunch! -- ok, so these posts are from 5+ years ago but they live on so they do.. and then fella's such as I come along feeling pleased that we've found people similarly afflicted by possible 'issues' only to find that you disappeared like a vapour.. like a mist of the night

Share this post


Link to post
Share on other sites

Oops. I have to admit it's one of the most infuriating things on the Internet when searching to solve a problem. You find someone has asked the exact same question but there's no conclusion. However I think it's safe to say that Miele washing machine doors are hard to close and need a slam - by design for some reason. Mine is 10 years old and I still have to slam it to shut it. It can take it though.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...