Jump to content
Appliance Offers
Dedy

Blomberg WN-8428, 8Kg front load, F 08 ??

Recommended Posts

Hi guys, sure hope you can help me on this one! With the virus situation we're stuck at home and my wife is loosing it ...:unsure:

Well, after completing a cycle and reloaded, my noticed that the machine is not responding.

  • Display is showing blinking "Play"sign (pause/play) and most of the other info is not showing
  • Program selector is not responsive either (nothing changes)
  • Unplugging for 20 Min did nothing
  • Found out on the net a procedure to turn it on while the program selector is at "12"and while holding the "Play/Pause"button and it turned on showing F 08. Also when pressing the "play/pause" at this stage shows C88 (Can be seen in attached video)
  • BTW I once knew a key combination to hold for a few seconds to reset the controller but I forgot it... does anyone know it?

I'm attaching videos of the display in normal Ön" and with the F-08 as I described above.

Any help on this would be very much appreciated!!! 

Thanks and wish us all good health!

Dedy

 

 

Edited by Dedy
misspell

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.

Unfortunately I don't have any error codes for Blomberg. What's that high pitched noise, is that the washing machine and normal?


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your appliance Spares 

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Hi Andy, 

Thank you for your reply. 

I have managed to solve this! 

Just went over the most suspicious things, it was the door switch /locker

By the way, to reset the code after the replacement, you need to hold the two buttons below the display, marked with a lock symbol... 

Best,

Dedy. 

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Get Which? for £1

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.



×
×
  • Create New...