Jump to content
Appliance Offers
Frankh

My Bosch Logixx 8 Sensitive wont "fast spin"

Recommended Posts

Hi,

I have a Bosch Logixx 8 washing machine that washes as normal, but when it is centrifuged it stops and the rinse lamp flashes.
If I try without clothes it spins as normal.

I have cleaned what can be cleaned.
Taken a reset.

Can it be the brushes?

Best regards
Frank H.

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

Normally if a washing machine spins ok without washing in but not with washing in the problem may be related to out of balanced loads Not spinning some loads

Other possibilities are carbon brushes (which is t applicable for you), a slack drive belt or a fault on the PCB. 


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Thanks for your reply Andy :)

I did find out that one of tree cables for the balance sensor on the vakkum side was broken.

I tryed to fix it, but the contact is not easy to spare. Do you know if i can disconnect/remove the sensor?

 

Frank H.

Share this post


Link to post
Share on other sites

Sorry for late reply. My notifications have been hit and miss. I've never tried to remove one. Make sure the drum is being loaded properly before suspecting the sensor.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...