Jump to content
Gary

BEKO WMB 61022M not starting

Recommended Posts

Hi I have a Beko WMB 61022 M that will not start. I have had it for about 4 years and it has been fine. The lights come on and I have changed the door lock switch but no change. I have checked voltage at the switch and that seems ok, 220 across middle and right or middle and left. The control panel shows no indication of burn out. Any suggestions would be very welcome. Thanks Gary

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

Hello Gary. I have a full article on this subject here Washing Machine Won’t Start. This is not good to be checking voltage inside the washing machine though. Testing for power getting through should be done with a continuity test meter which is totally safe. On some washing machines and open circuit motor of faulty carbon brushes in the motor can cause the whole washing machine to go dead. But usually this is a fault that can have many different causes I'm afraid.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×