Jump to content
Appliance Offers

Recommended Posts

Hi 

Hoping someone can help have a washer dryer that won't drain I have replaced the pump,pcb and the pump wiring but it has made no difference apart from the main module (which I understand needs programming if replaced) in the bottom of the machine I can't think what else it might be all pipes hoses are fine it's like the pump isn't getting any power 

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.

It could be something really simple in the end but you can't keep guessing at parts. The pump wiring and the PCB are exceptionally unlikely to be the cause. You should only replace a pump if you know it is getting activated and has a neutral return and is not physically blocked but isn't running. If a pump isn't running , most of the time something is jammed inside. 

Essentially you need to work through all the things in this article which covers every possible cause I could think of Washing Machine Won’t Drain Water

 


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your appliance Spares 

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

I'm not sure whats on your link I haven't done I have checked all pipes and there are no blockages as you can manuelly drains the machine fine and with a new pump,pump wiring and pcb it can't be these the pump simply does not get any power so what else could it be 

Share this post


Link to post
Share on other sites

Hello Stephen. The link contains all likely causes for. Washing machine not draining water. Where to look for a fault depends on if the pump is running or not. Both scenarios are covered. If the pump is running but not draining there is a link to this article Can’t find blockage but washing machine still not draining

If the pump isn’t running and it’s been replaced  it can only be because it isn’t getting a live feed or has no neutral return. If there’s no break in live or neutral to it and the PCB has been replaced I can’t think of any explanation.

 


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your appliance Spares 

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.



×
×
  • Create New...