Jump to content
Appliance Offers

Whirlpool Washer Dryer 1000 - Water Remaining Below Rubber

Recommended Posts

Quite a substantial amount of water is remaining below the rubber as shown in photo.

I tried to check if the three holes were blocked - they are not. Filter cleaned. All seems fine.

Any suggestions?


Share this post

Link to post
Share on other sites

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.

It looks like it may just be a badly designed seal unless it's not been fitted properly. There are often a few small drain holes in the bottom of a door seal which should be right at the bottom in the centre. Is this something that's just started to happen when it never did before?

Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your appliance Spares 

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...