Jump to content
Appliance Offers
andyr12345

Wouldnt It Be Cool To Programme/customize Your Own Wash Cycle

Recommended Posts

Got a WMUD843 Washer and the program that gets the most use daily is the 60'c Fast wash - however im peeved that I cannot select 90'c on this programme only 60'c/40'c/30'c for times when say I have some towels and want to give them a really good wash at high temperature at 90'c - other than that I can select 'cottons' @90'c but the programme lasts for hours, not knocking that much off if i press the 'time saver' button - i know you would need extra time to heat water in drum up to 90'c but Id settle with say 1hour 10 mins wash at 90'c - i think that would work and i just wish they gave you the option in the software of selecting quick wash at 90'c/60c/40c hate being restricted like this. also i would programme the last minute after spin to revolve the drum backwards and forwards gently before door opens because when door unlocks after spin all the clothes are 'stuck' to the side of the drum due to the centrifugal spin. How call i was thinking if you could plug a laptop with special software in the diagnostic socket on the back of the control board to get right into the software settings and tell it to wash at 90'c on a quick wash and 'tumble' at the last minute of a spin/wash. - im always mucking about with my android phones rooting them so I can get the phone to do what it wasnt designed to do and customizing it how i like it - would love to be able to do this to our washing machine :)

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

Hi Andy. You can connect laptops to some washing machines, Miele engineers for example all have laptops they can use to diagnose and reprogram certain things. They can for example reprogram them to take more water in on rinses or even increase the time they wait before timing out on fill if one is installed in low water pressure conditions (I think). However they will of course have specific software.

Lots of machines do already revolve the drum after final spin to unstick the laundry from the drum. I agree that it's necessary, any that don't are stupid. Some even keep revolving at intervals to reduce creasing. Some also allow fairly extensive customising of wash cycles although they are unlikely to let you change them so much they might not get laundry clean or may damage it. Miele usually have every feature you could want but at a price of course.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...