Jump to content
Appliance Offers
wendyem

Hoover Dyn8164D - Error Code E80?

Recommended Posts

Hello,

Does anyone have any knowledge as to what error code E80 refers to on the above model washing machine? It is not listed in the booklet I have; prior to this being displayed the washing machine had, on a couple of occasions, failed to spin correctly with the items still be soaked at the end of the cycle, but it had then gone on to be fine again for a few months.

Thanks

Share this post


Link to post
Share on other sites

Book washing machine & appliance repairs Buy appliance spare parts

Note: The links above are needed to help keep this site running, please consider using them.

None of the Hoover error codes I have go anywhere near up to 80.


Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

Hi - thanks for the reply. I have contacted Hoover as this error was not listed in my manual and I could find no mention of it anywhere on the internet. They advised that it usually indicates a fault with the motor but that was all they could tell me!

Share this post


Link to post
Share on other sites

Only two or three errors are ever listed in the user manuals, ones which often indicate user faults which they can sort themselves such as childlock on, or no water coming into machine (check tap is turned on) or not draining (check filter). Any others are always for engineers only and many are deliberately hidden or restricted as much as possible to anyone but a manufacturer's own engineers or dealers.

If it implicates the motor check the motor plug and all tags and connections inside it as well as the corresponding connector on the motor which it plugs into. Also check the carbon brushes to see if one is charred as per this article (carbon brushes diagnostics)

The carbon brushes diagnostics is written for Hotpoint brushes but the principles are exactly the same for all carbon brushes. If you can't find anything call an engineer as it could be too many other things.

  • Like 1

Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your Spares (4Washerhelp)

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post


Link to post
Share on other sites

June 2019

I have this E80 code coming up on my Belling Washer Dryer.  I have phone Belling and their customer service cannot fine anything about this code.  As my machine is still under warranty (1 week over 1yr old, I have a 2yr warranty) they are sending out an engineer.  I will re post when I know what the answer is, as there does not seem to be any answers on the web.  This may help anyone else, including washing machine engineers.  Thanks for this site, I have been here before.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...