Jump to content
Appliance Offers

New Bosche Vario Perfect Waq283S0Gb ? Rinse Cycles

Recommended Posts


I have a New Bosche VarioPerfect Waq283S0Gb washing machine and am delighted with how clean it washes, but perplexed at how the rinse cycles work.

First time I used the Cottons 60 deg wash, I was sure it only did 2 rinse cycles. I was expecting three which it did on the 40 deg easy care setting. I have just run the 60 deg wash again using aqua plus and was expecting it to do three rinses plus the extra one. However watching the water go in the drawer the third rinse went in the softener section and that was the last rinse.

Does anyone have this machine and know how this system works.

Many thanks Jay

PS Ran the 30 deg easy care and it ran the three rinses. :huh:

Edited by jaydee

Share this post

Link to post
Share on other sites

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.

This model has water saving technology so it probably senses how soapy the rinse water is and adjusts water usage accordingly.

Need an engineer, or to buy appliance spare parts? Please use my affiliate links to support this forum.

Book appliance engineer | Buy your appliance Spares 

Warning:  Read this before attempting any diy repairsNo representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of advice. I can't be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information on this website, which is given free of charge and in good faith.

Share this post

Link to post
Share on other sites

Hi Back again . I have just run the 40 deg easy care cycle and when it got to the empty wash water it spun out then started the rinse cycle but the wash was on and flashing with the rinse light. I did this once before and I thought it might be a fluke but not so :(

Thanks Jay

Share this post

Link to post
Share on other sites

Hi Jay,

Not the same machine, but it's possible that the programming could be similar.

The current Miele machines do 2 rinses as standard on all cycles set to 60 degrees or above. The theory is that hotter washing requires less detergent and therefore less rinsing. Using extra rinse on these cycles should increase them to 3 rinses (2 standard and 1 conditioner rinse. Conditioner is dispensed in the final rinse on all machines).

Hope this helps.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...