Note: The links above are needed to help keep this site running, please consider using them.
Search the Community
Showing results for tags 'switch'.
Found 2 results
Hi, my washing machine is not triggering the spin cycle automatically. When I use Normal or Perm Press to start the machine... the timer moves as normal but when it reaches the spin cycle, it just keeps on agitating until the timer reaches off and stops. When I go back to the machine, the clothes are just sitting in dirty water. At this point, the only way to start the spin/drain cycle is by manually rotating the switch to that position and starting the machine. It then spins/drains like normal. So basically... the spin cycle won't trigger automatically but can be manually triggered. Is this a problem with the timer? The lid switch seems fine because when I manually trigger the spin cycle and then lift the lid, the spinning stops. Name: Kenmore 700 Model: 110.28782700 Type: 111-01 Serial: CU4940094 Thanks, -Pete
Hi, I've got a Hoover DYN 9164DPG and today mid cycle it came up with an E03 message. Google says this is a drain problem? I opened the drain filter line and a fair bit of water came out but both the drain line and filter seem to be clear and the pump is turning ok. Even now with the machine fully drained it still won't go on to a spin cycle and the pump keeps running. I took the hose off the pressure switch and that seems clear too. Could the switch itself be broken? Many thanks, Rich.