Search the Community
Showing results for tags 'pressure'.
We have a washing machine plumbed into (cold water only) a non-mains supply from a low header tank in our flat. An old 1bar minimum machine (Bosch) used to repeatedly time-out on fills. Could be prodded to carry on from where it had left off, but pretty annoying. We eventually (when that broke) replaced that with an AEG which supposedly worked down to 0.5bar and that did seem to be much better behaved. But recently it too started misbehaving. Timeouts on fills, but also the conditioner drawer compartment didn't seem to be getting any water.... instead of dripping through the roof
Hi, I've got a Hoover DYN 9164DPG and today mid cycle it came up with an E03 message. Google says this is a drain problem? I opened the drain filter line and a fair bit of water came out but both the drain line and filter seem to be clear and the pump is turning ok. Even now with the machine fully drained it still won't go on to a spin cycle and the pump keeps running. I took the hose off the pressure switch and that seems clear too. Could the switch itself be broken? Many thanks, Rich.