Jump to content

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.

Leaderboard


Popular Content

Showing content with the highest reputation on 05/03/20 in all areas

  1. 1 point
    Thank you Bob and team! D7 Diode replaced on a 18 month old machine with minimal use in our holiday lodge. Another successful cheap fix here! £1.75 including P&P Much to my husbands surprise and delight. (Although the extra screws, plastic stay and double-sided sticky tape that holds the black box on did flummox him to start with). Beko you must take this problem seriously and get all your WDIR7543101 's with this issue fixed free of charge to keep some loyal customers from leaving you.
  2. 1 point
    Hi there, just came to say that Rob's post above turned out to be exactly what was wrong with mine as well! My washer was only 2 years old and suddenly stopped turning on one day. First I thought it was completely dead but realised I could occasionally hear a very faint beep after plugging it in. A repairman came in and after 20 seconds of poking around with a multimeter at the back of the machine announced that 'the motherboard' was likely broken, wanted to charge me around £115 to fix it (parts + labour) He didn't spend much time diagnosing it so I think he just guessed which board was at fault. Now, Rob did actually update his post a while ago to add a photo of the board as well as further description, but from the comments here it sounds like some people didn't see it? So anyway here is some of the same info again. If you open the machine from the back, it's in the bottom-right corner near the floor, and is the part called "Beko WDX8543130W Pcb Main" on their spares site, should you want to replace the whole thing. The diode in question is D7 - my multimeter beeped when testing it but the others all seemed fine - funnily enough exactly the same diode shorting out for both of us - maybe Beko had a bad batch of them? I'm no electrician so I bought the same diode Rob mentioned: STPS2h100 which is a 100v 2A, the original one was 100v 1A. A soldering iron purchase & few youtube videos on how to replace components on a PCB, and I was able to (carefully) replace the damaged diode, put everything back together, and it's working again! Thanks Rob! Saved me £100, plus I learned a few things.
  3. 1 point
    Hi, probably too late now but our washing machine, same make and model did the exact same thing. I am a qualified electrician and spent some time working out the wiring as Beko won't give the diagrams to you. I found that the circuit board on the left hand side (when viewed from the rear) is the motor speed controller (inverter), this was ok as the fault was not related. The front PCB had no lights on, but if you looked carefully I occasionally noticed that the Blue selector switch Led's were lit but very dull. The circuit board at the rear RH side is the main power supply and distribution/controller board. I found I had 240v at the input to the board but couldn't find any voltages elsewhere. I took it out and did some tests, I found a diode had blown, after replacing this with an uprated diode everything was working. Total cost £2.05 with express delivery included. I have pics of the boards and location of the diode if required. Regards Rob Other models affected include WDW85140, WDIR7543101, and Blomberg BWD384W0 EDIT Picture of mainboard attached. Diode that had blown was D7 located just above and to the left of the transformer in at least 2 cases. Board is located at the rear on the bottom right hand side when viewed from the rear. Diode rated at 100v 1A, changed for 100v 2A, I chose a STPS2h100 as its size was the same.

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.



×
×
  • Create New...