Jump to content
Appliance Offers

Leaderboard


Popular Content

Showing content with the highest reputation on 16/02/20 in Posts

  1. 2 points
    Bob. You beauty. Another rescued machine, so therefore confirmation that it fixes this issue on the Beko WDIR7543101 integrated washer/dryer. I took the liberty of taking a series of photographs, and made a brief guide below. This is just my experience, and I'm not a qualified electrician / white goods repair man, so you follow this guide at your own risk! Cheers, Jon 1. Drag the machine out on some cardboard! Make sure to isolate and unplug the device from the mains, the water and the waste before undergoing any of this work. 2. Remove the 5 screws from the rear The black box is located here at the bottom right 3. Remove these two screws to loosen the box 4. A piece of sticky foam holds it down, so run a knife along it to separate. 5. Carefully jiggle the black box out and make sure you de-clip the cable holders from the machine (circled red below) to allow you to move the box. The front cover just slides off to reveal the board. 6. Now it's out, carefully unplug all connectors 7. Gently lever the board out of the black box # 8. Replace this diode (D7) - see Bobs recommendation. I personally used these. 9. Reverse all of the steps above, and turn on!
  2. 1 point
    Hi Lesley The whole unit complete with casing comes out, in previous post I said that you have to jiggle it about, passing it down and under some pipes or other obstructions. You may have to cut 1 or 2 cable ties that hold the wiring loom in place in order to get enough slack to remove it. I assume the screws you are talking about are the ones that hold the casing in place, if not you have to remove them first. If you google "main circuit board Beko WDx854130w" and go to images you will see some with and some without the case. Regards Rob

Book washing machine & appliance repairs

Ransom Spares

Note: The links above are needed to help keep this site running, please consider using them.



×
×
  • Create New...