28 topics in this forum
I have the error E30 on our Hotpoint washing machine. The instruction book says e30 = motor error, but checking on the 'net I found it could be something as simple as the brushes, or as baffling as the triacs?? Any thoughts? Great site by the way.
Hello. I've just aquired a second hand Hotpoint WD22A Washer Dryer and everything works great except for I cannot get High Speed Spin to work. When I move the programmer to High Spin (1000rpm) the machine creeps up slowly on speed but then stays at a low speed slow spin. I had a spare motor so I changed that. No joy. And I have replaced the carbon brushes - still no high speed spin. I am now thinking it a fault on the PCB board next to the programmer but I dont have another PCB /Programmer to try. There are two large Transistors on the Heatsink (TY1 & TY2) - could one of them be faulty? The Instruction Book says that there is a feature on the WD22 that will stop t…
The belt on my Hotpoint 800 Electronic 9506(old) has come off. How do I get it back on, and where does it go? Thanks.