I'm praying there is someone out there who will read this and know what to do about this problem........ Just bought a brand new washing machine which was delivered yesterday afternoon. The transport bolts were removed, and it was connected up to the power and water. Before the first wash the machine must run a cycle on empty and the instructions were followed to the letter - putting 1 litre water in the drum and a half measure of detergent in feeder, set to the required programme and pressed Start. Nothing happens. I tested the water pressure which is fine, checked all the connections numerous times, and still nothing.
The shop where we bought the appliance weren't interested and only suggested we get the water pressure tested - which we had already done. Any suggestions??? (By the way, considering this machine cost £700 I wasn't impressed with the pathetic one sheet of instruction manual.)
