Zanussi Iz141S Won't Start Cycle
Posted 13 July 2012 - 09:28 AM
I've had a few problems of late with my zanussi IZ141s, a few months months back it began stopping mid cycle showing a fault code (possibly e20 but not 100% sure). however that has recently stopped happening, now the machine will not begin a cycle. on pressing start it makes all the right noises as if it is going to fill but doesn't and then it stops all together. if i shake the machine vigorously then it sometimes gets going but doesn't always complete the cycle.
any help/advice would much appreciated, as i'm trying make the tough decision of repair or replace?
Note: The links above are needed to help keep this site running, please consider using them.
Posted 13 November 2013 - 12:08 PM
Please consider buying spares from my 4Washerhelp links to support my sites. Prices are same as the other major spares sites but it helps keep my sites running.
- Disclaimer: You must be competent to carry out repairs, and accept responsibility for your own and other people's safety* - DIY repair safety and tips
* I use all reasonable efforts to ensure information contained on Washerhelp is correct and accurate, no representations or warranties are made (express or implied) as to the reliability, accuracy or completeness of such information. I therefore cannot be held liable for any loss arising directly or indirectly from the use of, or any action taken in reliance on, any information appearing on this website, which is given free of charge and in good faith.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users