zanussi71

Members
  • Content count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

About zanussi71

  • Rank
    Member
  • Birthday
  1. my Zanussi TurboDry 1000 does not spin properly. i have checked the brushes and they look ok, so now i am trying to figure out whether the motor is also ok. i am trying to do a continuity test as described here: http://www.washerhelp.co.uk/forums/topic/67-hotpoint-wm31-spin-failure/page__p__237__hl__%2Bcontinuity+%2Bpins__fromsearch__1#entry237 Zanussi washing machine: Model TurboDry W 1042 W Motor: MCA 38/64-148/ZN20 8 Pin connector Pin 1 : Brown Pin 2 : Blue (brush 1) Pin 3 : Light brown (brush 2) Pin 4 : Grey Pin 5 : Grey Pin 6 : Black Pin 7 & 8 : Red (these are thinner and seems like it is the tacho coil) There is continuity between Pin 1 and Pin 6, i get a reading of 02.5 There is continuity between Pin 2 and Pin 3, i get a reading of 04.3 There is continuity between Pin 4 and Pin 5, i get a reading of 00.7 How do i know if the motor is ok from these readings ? thanks very much